NOYAFA NF-8209S Network Cable Tester and Tracer with Anti-jamming Porbe, Crimp, PoE Port
Locate The Target Cable Quickly - Two scanning modes, analog and digital, can be switched at any time, with an anti-jamming probe, adjustable sensitivity, tone generator, and LED light, so that the receiver can quickly and accurately locate the target cable in a wide variety of complex environments.
Ethernet Continuity Test - Analyze CAT5 CAT6 (STP & UTP) line faults, such as normal, open circuit, short circuit, and cross, and see the results instantly.
Measure Cable Length Accurately - Measure the network cable in the range of 2.5m-500m.
Port Blink Test - Identify the network port by the blinking port light on the Hub or Switch. Available to 10M/100M/1000M Hub/ switch.
PoE Testing - Identify which pins are providing power and detect how much voltage, and identify which type of PSE (AT/AF standard).
Work Safely - Non-Contact Voltage (NCV) tester detect AC voltage (70V-1000V) without disrupting the electrical system, providing you with maximum safety and convenience.
Wiremap:
Cable types: CAT5/CAT6
Cable sequence and fault testing: Normal, open circuit short circuit, cross,etc
STP/UTP: Both compatible
Max range: 600m / 1,968ft
QC Test:
Test type: 8P
Response speed: No longer than 1 second
Minimum recognition: 10cm / 3in
Length:
Test line: CAT5 & 6
Test range: 2.5 - 200m /8 - 656ft
Accuracy: ≤20m±4.6m; 20-100m ±2.4m; >100m±3.2m
Scan:
Cable type: CAT5 & 6
Max signal voltage: 5V ± 1.0VP-P
Frequency: 455KHz
Dual mode: Analog / digital mode
Max range: 600m / 1,968ft
PoE:
Voltage test range: DC 5-60V
Power supply core jumper mode: End jumper, middle jumper, 8-core power supply, unknown.
PSE type: Non-standard, IEE802.3at/af
Port Blinks
Full-duplex/ half-duplex recognition
Auto-negotiation/ non-auto-negotiation
Switch type: 10m/100m/1000m
Transmitter:
LCD Display: 180*64 with backlight
Language: Chinese/English
Ports: RJ45 * RJ11
Power supply: 3.7V 1400mAh polymer lithium battery
Low battery power indication: yes
Auto-off: 15/30/60min or off
Voltage protection: DC60V
Maxi working current: ≤200mA
Size: 125*70*32mm
Receiver:
Adjustable scan strength: Yes
NCV: AC70V - 1000V 50/60Hz
Voltage protection: DC 60V
Maxi working current: ≤200mA
Ports: RJ45
Voice prompt: yes
Headphone jack: yes
LED: Power indication & LED lighting
Power supply: 3.7V 1400mAh polymer lithium battery
